"> {literal} {/literal}
Voss Musikk
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Hjem » Lyd » Mikrofoner » Kondensator Stormembran » Lewitt LCT 940 Authentica Rør og FET Stormembranmikrofon

Lewitt LCT 940 Authentica Rør og FET Stormembranmikrofon

Art.nr: LEW-LCT940
16.099,-
Antall:
Lewitt
Ikkje på lager, ca. 4-7 dagers leveringstid, så lenge varen er på lager hos leverandør.

Lewitt LCT 940

Premium large-diaphragm FET condenser microphone and top-notch tube mircophone in a single housing. Blend the two independent characteristics for unlimited possibilities.

Tube and FET microphone in one housing
Blend tube and FET circuit at any ratio
Studio centrepiece
12AX7 tube
Remote control and power supply in one
Multi-pattern design
Included: Shock mount, LCT 40 Wxx, 11-pin audio cable

The LCT 940 unifies the specific characteristics of a premium large diaphragm FET condenser microphone and a top-notch tube microphone.

With "Tube" you get warmth and musical harmonics, while "FET" gives you clear and nuanced sound. Blend tube and FET circuit at any ratio and find your ideal mix. The LCT 940 features a total of nine different polar patterns.

Type - Condenser, externally polarized
Acoustical operating principle - Pressure gradient transducer
Transducer Ø - 25.4 mm, 1 in
Polar pattern - Omni, wide cardioid, cardioid, supercardioid, figure-8, four intermediate patterns
Frequency range - 20 ... 20,000 Hz
Sensitivity - 23 mV/Pa, -33 dBV/Pa (cardioid) 20 mV/Pa, -34 dBV/Pa (omni) 23 mV/Pa, -33 dBV/Pa (figure-8)
Equivalent noise level (FET) - 8 dB (A), cardioid 9 dB (A), omni 8 dB (A), figure-8
Equivalent noise level (Tube) - 12 dB (A), cardioid 13 dB (A), omni 12 dB (A), figure-8
Max. SPL for 0.5 % THD (FET) - 143 dBSPL, 0 dB pre-attenuation
Max. SPL for 0.5% THD (Tube) - 140 dBSPL, 0 dB pre-attenuation
Signal / noise ratio (FET) - 86 dB (A)
Signal / noise ratio (Tube) - 82 dB (A)
Dynamic range of FET mic. Amp. - 135 dB
Dynamic range of Tube mic. Amp. - 128 dB
Pre-attenuation pad - 0 dB -6 dB -12 dB -18 dB
Low-cut filter - linear  40 Hz (12 dB/oct) 150 Hz (6 dB/oct) 300 Hz (6 dB/oct)
Internal impedance - 200 Ω
Rated load impedance - 1,000 Ω
PSU - supply voltage - 230 V, 50 Hz 110 V, 60 Hz
Current consumption - 170 mA
Connector - Gold plated 11-pin XLR
Microphone dimensions - 192 x 60 x 46 mm, 7.5 x 2.4 x 1.8 in
PSU dimensions - 250 x 150 x 70 mm, 9.8 x 5.9 x 2.8 in
Microphone net weight - 662 g, 23.3 oz
PSU net weight - 1,930 g

https://www.lewitt-audio.com/

Kommentarer

Share |
Lewitt

Lewitt

We push microphone technology forward.

We believe that great sound is for everyone, whether you're recording at home, on stage or in the studio as a beginner or professional. 

To make sure that nothing limits your performance on the technical side, we're here to push microphone technology forward.

For us, it is key that our microphones help you to accomplish your ambitions easily and with better sound than ever before.

Alternative produkter

Kunder som så på dette så også på

Relaterte produkter

Trykk ENTER for å søke