-
0
- God jul:
- Instrumenter
- Software
- Transportkasser og gigbager
- Lyd
- Lys
- Tilbehør/Rekvisita
- Lagersalg
-
Merker
- Tilbud
Handlekurven er tom
">
Focusrite Scarlett Solo Gen3 er et 24 bit/192 kHz USB-lydkort med én mikrofonforsterker og én instrument/linje inngang. På frontpanelet finnes en hodetelefonutgang, mens det på baksiden er to stk balanserte jackutganger.
Mikrofoninngangen har knapper for +48V fantommating og "Air". Når sistnevnte er aktivert, innkobles en analog krets som emulerer lyden i Rupert Neves ISA-design. Prøv den på alle kilder du ønsker langt fremme i miksen, som vokal og akustisk gitar!
Lydkortet strømforsynes via den medfølgende USB Type C-kabelen. Forsinkelsesfri innspilling løses enkelt via en "Direct Monitor" knapp.
Mikrofonen som følger med er en elektret kondensator med kardioidekarakteristikk. Hodetelefonen er av lukket type, for å minimere lekkasje til mikrofonen.
Produktregistreringen er svært intuitiv, med en "quickstart guide" som tar deg gjennom alle leddene i prosessen.
En ekstra bonus når du kjøper et Focusrite-lydkort, er tilgangen til deres Plug-In Collective. Her får du annenhver måned gratis plug-ins og softwareinstrumenter fra anerkjente fabrikanter. Programvarepakken ved førstegangs registrering er også imponerende:
Clock Source: Internal
Supported sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Microphone Input
Dynamic Range: 111 dB (A-weighted)
Frequency Response: 20 Hz to 20 kHz ±0.1 dB
THD+N: <0.0012% (minimum gain, -1 dBFS input with 22 Hz/22 kHz bandpass filter)
Noise EIN: -128 dB (A-weighted)
Maximum Input Level: +9 dBu
Gain Range: 56 dB
Input impedance: 3 kohms
Line Input
Dynamic Range: 110.5 dB (A-weighted)
Frequency Response: 20 Hz to 20 kHz ±0.1 dB
THD+N: <0.002% (minimum gain, -1 dBFS input with 22 Hz/22 kHz bandpass filter)
Maximum Input Level: +22 dBu at minimum gain
Gain Range: 56 dB
Input impedance: 60 kohms
Instrument Input
Dynamic Range: 110 dB (A-weighted)
Frequency Response: 20 Hz to 20 kHz ±0.1 dB
THD+N: <0.03% (minimum gain, -1 dBFS input with 22 Hz/22 kHz bandpass filter)
Maximum Input Level: +12.5 dBu at minimum gain
Gain Range: 56 dB
Input impedance: 1.5 Mohms
Line Outputs
Dynamic Range: 108.5 dB (A-weighted)
Maximum Output Level (0 dBFS): +15.5 dBu at minimum gain; balanced outputs
THD+N: <0.002% (maximum level, -1 dBFS input with 22 Hz/22 kHz bandpass filter)
Output impedance: 430 ohms
Headphone Output
Dynamic Range: 104 dB (A-weighted)
Maximum Output Level: 7 dBu
THD+N: <0.002% (maximum level, -1 dBFS input with 22 Hz/22 kHz bandpass filter)
Output impedance: <1 ohm
Capsule Element: Electret Condenser
Diameter: 20 mm
Polar Pattern: Unidirectional (cardioid)
Sensitivity: -36 dB ±2 dB (0 dB = 1 V/Pa at 1 kHz)
Frequency Response: 20 Hz to 20 kHz
Impedance: 200 ohms ±30% (at 1 kHz)
Recommended Load Impedance: >10 kohms
Equivalent Noise Level: 16 dBA (A-weighted IEC651)
S/N Ratio: 74 dB
Power Requirement: 48 V phantom supply
Current: 3 mA
Type: Closed-back
Drive diameter: 50 mm
Impedance: 32 ohms
Sensitivity: 98 dB ±3 dB
Frequency response: 20 Hz to 20 kHz
Max. power rating: 1.2 W
Cable length: 3 m (approx.)
Connectors: 3.5 mm stereo jack, 6.35 mm screw-on adaptor
Weight: 288 g (inc. cable)
The Focusrite brand was established way back in 1985 and the founding principles of the company were to develop products that sounded more musical, in addition to just measuring well - today,we still carry these founding principles forward in our class-leading and award-winning designs. We measure our success by the success of you, our clients, and you will find Focusrite product prominent in professional and project studios throughout the world. Based just outside of London, we work with the best design talent throughout the world to bring you the tools to enhance the way you work. Our product is made with pride and principle in a highly automated ISO 9002 factory with significant level of test by engineers who themselves are musicians and understand the part our product plays in your process.
Kommentarer