Stort utvalg | Fri frakt på ordre over kr.3.000,- | Betaling med Vipps eller Klarna

Crown XTI2002 forsterker m/DSP 2 x 800W i 4ohm

Art.nr: 740-02001

13.387,-

Antall:

Crown

Normalt 3-5 dagers leveringstid, så lenge varen er på lager hos leverandør.

There’s no debate – when you choose Crown’s XTi 2 Series, you’re choosing one of the

most powerful and innovative amplifiers on the market today. That’s because the all-new

XTi 2 Series amps continue to set the standard for unmatched performance and value,

delivering the goods night after night without breaking a sweat.

With such innovations as a universal tracking switch-mode power supply and a fully

integrated suite of speaker processing tools, these amps are at the top of their class

when it comes to thermal efficiency and system flexibility.

You also have greatly improved control capabilities. The addition of Peakx Plus™ Limiters

gives you full command over threshold, attack and release, and we enhanced the

Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing

for application-specific tuning.

Plus, you’ll now be able to tailor fan speed for specific applications and have software

visibility of the Power Supply Temperature and AC Line Voltage. Combine all of that with

integrated cast-aluminum rack handles for maximum durability and portability and you

have the power to move you – and the world.

Channels	2
Sensitivity	1.4V
Rated Power Output (per channel)	1000W 2Ω, 800W 4Ω, 475W 8Ω
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms)	100 dB (A-weighted)
THD	< 0.5%
Frequency Response (at 1W, 20 Hz - 20 kHz)	+ 0 dB, -1 dB
Crosstalk (below rated power) 20 Hz to 1 kHz	>70 dB
Dimensions	3.5" x 19" x 12.25"
Weight	18.5 lbs (8.4 kg)
Shipping Weight	21.5 lbs (9.8 kg)
IEC Power Connector	15A

NEXT GENERATION FEATURES:

•

Peak

Plus™ Limiters provide the ultimate in system performance

and protection by allowing full control over threshold, attack,

and release

• Enhanced Subharmonic Synth section provides user control

over frequency, gain and filter type for system-specific tuning

• 3 User-defined fan mode controls – normal, early and full-

speed – for matching fan performance to a specific application

• New system monitoring provides software visibility of

AC line voltage and power supply temperature

• Increased number of presets to a total of 30; 29 of which

are user definable

• Integrated cast-aluminum handles for easy handling

and enhanced durability

• Locking power cord clip provides a secure connection

between the amplifier and power cord

• Updated HiQnet Band Manager™ and System Architect™

control software

Stereo (per channel)

1,000W

Stereo (per channel)

800W

Stereo (per channel)

475W

Bridge - Mono

1,600W

Bridge - Mono

2,000W

PERFORMANCE

Sensitivity (for full rated power at 4 ohms):

1.4 Vrms

Frequency Response

(at 1 watt, 20 Hz to 20 kHz): +0 dB, –1 dB

Signal-to-Noise Ratio (below rated 1kHz

power at 8 ohms):

XTi 1002/2002/4002: 100 dB (A weighted),

XTi 6002: 103 dB (A weighted)

Total Harmonic Distortion (THD):

< 0.5%

Damping Factor 20 Hz to 1 kHz:

> 500

Crosstalk (below rated power):

20 Hz - 1 kHz: > 70 dB

Input Impedance (nominal):

20k ohms balanced, 10k ohms unbalanced

Maximum Input Signal:

+22 dBu typical

AC Line Voltage and Frequency

Configurations:

100 VAC, 120 VAC, 220-240 VAC 50/60 Hz

AC Line Current (120 VAC amplifier playing

1/8 power pink noise into 4 ohms per ch):

XTi 1002: 6.8A; no more than 38W at idle,

XTi 2002: 8.3A; no more than 38W at idle,

XTi 4002: 10.5A; no more than 38W at idle,

XTi 6002: 15.3A; no more than 180W at idle

Operating Temperature:

C to 40

C at 95% relative humidity

(non-condensing)

INDICATORS

Signal Indicator:

Green LED, one per channel,

illuminates when a very low-level signal

is present at input (may be used for

troubleshooting cable runs).

–10 Indicator:

Green LED flashes when output

signal exceeds –10 dB below clip.

–20 Indicator:

Green LED flashes when output

signal level exceeds –20 dB below clip.

Ready Indicator:

Green LED, one per channel,

illuminates when the amplifier is ready to

produce audio.

Clip Indicator:

Red LED, one per channel, turns on

at the threshold of audible distortion.

Temp Indicator:

Red LED, one per

channel, illuminates under excessive

temperature conditions.

Power Indicator:

Blue LED illuminates when the

amplifier has been turned on and has power.

CONTROLS

Level:

Two front-panel rotary level controls,

one for each channel.

Power Switch:

On/Off switch applies AC power

to the amplifier.

Sel/Prev/Next Buttons:

Three buttons near the

LCD screen that are used to access menu

items and front panel lockout.

LCD Screen:

Backlit liquid crystal display that

shows preset and processing status.

INTEGRATED PROCESSING

Input EQ:

6 parametric filters per channel

with adjustable Q, ±15 dB boost/cut. Also

adjustable high and low shelving filters. This

8-filter EQ section can be bypassed.

Crossover Filters:

Highpass and Lowpass per

channel. Butterworth 6/12/18/24 dB per

octave. Linkwitz-Riley 24/48 dB per Octave.

Also includes ± 15 dB bandpass gain and

polarity control.

Output EQ:

8 parametric filters per channel with

adjustable Q, ±15 dB boost/cut. This 8-filter

EQ section can be bypassed.

Delay:

For signal alignment of driver;

50 ms of total delay.

SubHarmonic Synth:

Takes the low-frequency

content of the input signal and “synthesizes”

a new signal that is the same as the input

signal but one octave lower. The new

synthesized signal is then mixed with the

original signal to create the effect. New:

Users now have control over frequency, gain,

and filter type.

Peak

™

Plus Limiter:

User defeatable limiter

that allows users to control Threshold,

Attack, and Release times.

Presets:

30 total presets, 29 of which

are user-definable.

INPUT/OUTPUT CONNECTORS

Input Connectors:

XLR, one per channel)

Link/Out Connector:

Loop-thru signal from input

connector for linking another amplifier, one

per channel.

Output Connectors:

Two Neutrik

Speakon

NL4MP

output

connectors.

Channel-1

Speakon

is wired with Ch. 1 and Ch. 2 outputs for use

with optional single 4-conductor cable. Two

binding post outputs (in parallel with Speakon

connectors).

HiQnet

™

USB Connector:

Type B, connects to

HiQnet™ network.

CONSTRUCTION

Chassis:

Steel

Front Panel:

Cast-aluminum

Cooling:

Proportional speed fan with

front-to-rear airflow.

Dimensions:

XTi 1002/2002/4002: 19” (W) x 3.5” (H)

x 12.25” (D),

XTi 6002: 19” (W) x 3.5” (H) x 16.2” (D)

Net Weight:

XTi 1002/2002/4002: 18.5 lbs (8.4kg),

XTi 6002: 24.0 lbs (10.9kg)

Shipping Weight:

XTi 1002/2002/4002: 21.5 lbs (9.8kg),

XTi 6002: 30.0 lbs (13.6kg)

Kommentarer

Share |

Crown

Vis alle produkter fra Crown

Acquired by Harman International in March of 2000, Crown has continued to move forward, producing numerous innovative designs, such as the DriveCore™ Install (DCi) series that was released in 2013. This series features both analog and Network amplifiers for the installed sound market. Using just one tiny chip to replace over 500 parts makes the DCi series of amplifiers the most reliable and innovative amplifier on the market today. These products and more embody the reliability and innovativeness that have long been the manufacturer’s hallmarks. Crown today continues to delight its customers with products that consistently exceed both specifications and expectations, even on the most demanding tours and installations.