-
0
- God jul:
- Instrumenter
- Software
- Transportkasser og gigbager
- Lyd
- Lys
- Tilbehør/Rekvisita
- Lagersalg
-
Merker
- Tilbud
Handlekurven er tom
">
ROOTMASTER-C210T-500-EVO II For those seeking Ashdown tone, power and reliability without the weight normally associated with high power bass amplifiers the RM C210-500-T EVO II is the solution. Weighing in at just 18KG but boasting 500 watts of power delivered via two 10" Whiteline Ashdown drivers this combo is laden with class leading quality and features. The Rootmaster EVO II range also now comes equipped with an on-board headphone preamp to allow for silent practice, which doubles up these gig-ready amplifiers as handy practice devices. The pre amp includes both passive and active input jack sockets for use with high and low output instruments, this sets a clear signal path to the input control enabling you to fine tune your input level using the trademark Ashdown VU meter. With the signal at its optimal level, you then hit the rich features designed to sculpt and enhance your tone, such as the shape button, comprehensive 5-band EQ and on-board compressor. The drive control, as always delivers a delectable valve emulated over-drive, whilst the sub harmonic controls add further fatness to your tone - both can be foot-switched via an FS 2 foot-switch (sold separately). The rear of the Rootmaster EVO II is also feature laden and has a balanced DI out, Line In, FX Loop, Headphone out plus a Neutrik Speakon/Jack for adding an 8 Ohm extension cabinet. Lastly a handy mute switch allows silent tuning and changing of instruments, the VU changing from orange to cool blue when muted. Matt anodised alloy front panel Ashdown have upgraded the ampÕs front panel with a matt anodised alloy finish, replacing the previous polished stainless steel. This simple, yet observant modification makes reading your amp settings that bit easier when placed under bright stage lighting. No more reflective surfaces. Simple, powerful EQ The Rootmaster EVO seriesÕ pre amp now includes a passive and active input jack socket for use with high and low output instruments. The five- band rotary tone controls act with surgical precision to provide total control over your sound, while a shape switch instantly dials you in to a classic Ashdown tone setting, straight from the world-famous ABM. One-knob Compression Instantly adding warmth and body to your tone, this simple to use, great sounding compressor delivers a powerful, even sound to make sure your bass is smooth as silk and will fill out any mix. Overdrive & Sub With footswitchable flexibility, our tube-emulated overdrive can take your core bass sound and push it into warm overdrive through to distorted filth whenever you need to add extra grind and girth to your tone. Bringing extra depth and definition to your bass parts, the Sub-Harmonic Generator lets you dial in a sub-octave and kick it in via footswitch whenever you need the extra depth for those super-heavy Godzilla moments. Totally connected If you want to use your favourite pedals or multi-effects, youÕll find send and return sockets on the back panel, along with a DI output for direct injection into the PA mixer or recording console and a Line Input (with front panel level control) so you can jam along with a backing track in rehearsal. A pair of Neutrik Jack/Speakon sockets with a minimum 4 ohm load provides flexible partnering options with a dedicated range of Rootmaster EVO cabinets. The Rootmaster 500 EVO II can be used to power a single 8 ohm cabinet, a pair of 8 ohm cabinets or a single 4 ohm cabinet. Headphone Output The Rootmaster EVO II range now comes equipped with an on-board headphone preamp to allow for silent practice,which doubles up these gig-ready amplifiers as handy practice devices. The headphone preamp maximises the full sound potential of your headphones, so now your in ear sound can match the quality of your stage soundÉ given you have the correct (Meters Music) headphones, of course! Specifications Power Output 500 Watts Power Requirement 115-230 Volts Speakers 2 x 10" Ashdown Whiteline Frequency Response -3dB @ 17Hz und 30KHz High Instrument Input Impedance 3.9m Ohms, input range 150mV Low Instrument Input Impedance 10k Ohms, input range 300mV - 40V p-p Line Input Impedance 22k Ohms, input level 0dBu nominal DI Output 600 Ohm balanced, Level 0dBu nominal Tuner Output Impedance 22k Ohms, Level 0dBu nominal Impedance 8 Ohm Internal. Minimum 4 Ohm with extension cabinet added Signal to noise Better than 80dB (EQ flat) EQ Bass +/-15dB @ 100Hz Lo Mid +/-15dB @ 220Hz Middle +/-15dB @ 660Hz Hi Mid +/-15dB @ 1.6kHz Treble +/-15dB @ 7kHz shelving Deep + Effects Send Impedance 22k Ohm, Level 0dBu nominal Effects Return Impedance 22k Ohms, Input Level 0dBu Nominal Distortion Less than 0.5% THD H x W x D (mm) 590 x 470 x 335 Weight (kg) 18
So, it's 1997, and armed with a wealth of experience and headful of new ideas, Gooday kickstarts Ashdown Engineering to life with a simple vision – to build and 'engineer' a better bass amp.
With a nous for innovation and a flair for design, many would've jumped straight in, but Gooday was smart enough to first court feedback from some of the world's most respected bass players, including John Entwistle (The Who), Mark King (Level 42) and JJ Burnel (The Stranglers).
Inspired by the comments from these trusted advisors, Gooday focused his efforts on designing a new kind of bass amp, where superior tone was matched by unrivalled power and tour-grade performance in a truly engineered, uniquely-styled package.
Kommentarer